65337ed0yo

留下你的信息

Digital Electronic Detonator(Delay time 0~ 16000ms)

Digital electronic detonator( EDD) consists of special blasting machine and digital electronic detonator( EDD) , which can meet all kinds of complex blasting designs.

    Description

    EDD Initiation system

    Digital   electronic   detonator( EDD)   consists   of   special   blasting machine  and  digital  electronic  detonator( EDD) ,   which  can  meet  all kinds of complex blasting designs.
    Blasting  machine  is  mainly  used  for  the  set  and  modification  of EDD  delay time.  It also has network detection function and initiation function  for  both  single  detonator  blasting  network.   One   blasting machine will initiate 4 0 0 pcs detonator at most.  It will initiate more than 10000pcs detonators if they are connected into network.

    Performance

    Item Performance
    Delay  time  set  and

    minimum delay   interval

    0~ 16000ms ; 1ms
    Delay  Accuracy

    Delay time≤100ms,Variation range: ± 1ms

    Delay time >100ms,Variation range <0.2%

    Water  resistance

    Under normal temperature, immerse the electronic detonator in water

    with a pressure of (0.3±0.002) MPa for 4hrs. After being taken out,

    initiation performance does not change

     

    Anti- temperature

    In 85℃ for 4 hrs, no explosion.After taking out, detonate normally.

    In -40℃ for 4 hrs, After taking out, detonate normally.

     

     

    Anti- temperature and impact

    resistance

    The electronic detonator in -40℃for 3hrs and then in 85℃for

    3hrs ,the temperature conversion time is 20s-30s , and the

    electronic detonator should not explode after three cycles .After

    taking it out , at room temperature for 1h , and the electronic

    detonator can detonate normally.

     

    Tensile

    19 .6N , the wires and plugs connectors should not be damaged or

    moved visually , and the electronic detonator be able to detonate

    normally.

    Anti  static

    Leg-wire to leg-wire , leg-wire to shell(25KV/500PF/500Ω ) ,

    discharge no ignition

    Leg-wire to leg-wire , leg-wire to shell(8KV/2000PF/0Ω ) , discharge

    no ignition

     

     

    Anti-stray current

    100mA stray current is introduced into the bus, and the detonator and

    initiator communicate normally.

    Single detonator applied stray current of 250mA for 5min, without

    accidental detonation.

     

     

    Resistance to RF

    RF energy with a power of 10w into the electronic detonator , and the

    electronic detonator should not explode in two modes:leg-wire to

    leg-wire and leg-wire to shell .

     

     

    Anti-impact

    Under the condition that the weight is (2.0 ±0.002) kg and the height is (0.8±0.01) n, the electronic detonator should not explode when it hits the head fuse and the charging part of the primary explosive respectively.

    Flexibility

    Under 50N, 90 ° angle gravity, no fracture or damage to the shell

    Anti- drop

    No explosion under 5 m of free drop and led drop

    Jolt test

    150mn high, 60Hz frequency, 10min vibration, no explosion and structural damage of detonator.

    Network  test

    Test and verify in two-way communication, make sure no problem , and blast successfully

     

    Network  capacity

    Single blasting machine connects no more than 400pcs detonators;   When over 6000pcs, use the synchronized blasting machine

    description2